Article Directory

Standing-seams roofs are made up of many shingles or panels that interlock on the vertical axis, running from the roof's edge to its eaves. The point where two panels interlock (the seam) is raised a little off the flat roof surface, which allows water to run off the roof without any seeping between panels. Based on seemingly simple structural principles, the complexities of installing a standing-seam roof are not to be underestimated, the reason that DIY standing-seam roof installation will seem like a risky proposition to anyone in the know.

And indeed, while getting hold of the roof components might be a bit expensive, the installation is the exact opposite. Indeed, metal roofing panels of the standing seam variety are very light - often no more than a pound - and as such your contractor's not going to charge you anything near the rates he would installing heavy traditional materials. If he does, well, he's trying to stiff you, and you need to shop around for a new contractor. When you don't even need to remove the old roofing materials to install a new layer, there can be no cause for amplified up costs beyond the belief that you're dealing with affluent, gullible customers.

This is why a DIY standing-seam roof installation is just more trouble than it's worth. But if you're not convinced and intent to push through with your project, here's some metal roof installation tips. After you lay down your waterproof plastic membrane (an essential feature for making sure you don't let any water through your roof), you'll need to chase it with a layer of roofing paper, which you must ensure covers every nook and cranny including the spaces between the different roof surfaces (the roof valleys). One part of the job you'll definitely want to done for you (unless it's your goal to become a professional roofer and you're just practicing on your own home) is the making of ridge-cap, which is preformed to fit over the roof's peak. Once this groundwork has been laid, you're ready for the shingles.

If you're intent on going through with your DIY standing-seam roof installation, however, here's a few tips. You'll probably want to lay down some kind of waterproof plastic membrane over the existing roof structure, followed by a good layer of roofing paper which will ensure that water stands no chance of making it through and into your home. Don't neglect to fill in the roof's valleys (the spaces between roof surfaces). Then you'll need to cover the roof's peak with a preformed ridge-cap, which you'll need to get made to order unless you really intend to go into the roofing business professionally.

Now, all this is well and good until you realize that your roof isn't regularly shaped. And I'll tell you, most peoples' roofs fall into the category of irregular. Just about everyone's roof has some kinky little feature, like a skylight or a chimney or a dormer, that needs to have pre-made shingles cut in accordance with its shape. Should you attempt to use your regular shingles without consideration for the unique requirements of these areas, you're going to end up with a roof that is either ugly or practically ineffectual. The fact is, the tool for this job is not a saw or a hammer, it's a hydraulic powered shear with teeth sharper than razor blades that trained professionals use to quickly cut standing seam roofing panels to size on site. It's called a brake, and it's the reason you want a pro doing this kind of a job.

So maybe, on just this one occasion, it's the time to loosen those fists and hand over the cash for a skilled roofer's work. Indeed, if your worker as recommended by the manufacturer, or at least is recognized as qualified to install standing seam roof panels, it'll mean that your roof is subject to warranty - and that you can look forward to fifty or more years of being secure in the knowledge that you've a strong roof over your head.

So maybe, on just this one occasion, it's the time to loosen those fists and hand over the cash for a skilled roofer's work. Indeed, if your worker as recommended by the manufacturer, or at least is recognized as qualified to install standing seam roof panels, it'll mean that your roof is subject to warranty - and that you can look forward to fifty or more years of being secure in the knowledge that you've a strong roof over your head.